Thursday, November 29, 2012

First Undersized Urbanite Project - A Herringbone Pattern False Floor

Since I am renovating a Keystone of Boston dollhouse that is in very, very good condition, I want to modify it in a way that maintains its value.  Not that I think I could actually get money for it one day, but who knows?  Maybe it will one day be auctionned off at Christies.  But, realistically, I want to be able to change it without destroying it.  So, the first project that I have taken on is to redo the floor in the main room.  The main room is a combination living room and dining room, with a half wall partitioning them.  So, the actual measurements are a whopping 15" x 24".  I am making the "hardwood" flooring from coffee stirrers.  Cost: $0.00.  Thank you, Trader Joe's and Barnes and Noble and Starbucks.  Each stirrer is 5.5" long, and my pattern requires cutting them to 7/8 of an inch long.  I will definitely regret this decision later, if I do not already realize my foolhardiness.

What I've done so far is fashion a cardboard footprint.  I had to glue two 8.5" x 11" pieces (which, for those math phobes out there, makes 17" x 22") and made up the rest with strips.  Then, I surrounded the perimeter with full coffee stirrers, and I will painstakingly and hopefully patiently glue the tiny, tiny strips of wood into a zigzag pattern.  Let's do the math, shall we?

Area of floor: 360 square inches (minus around 7 square inches for the cutout for the stair landing)

Area of one wood strip: 0.1640625 square inches (dimensions 3/16" x 7/8" or 0.1875" x 0.875")

Number of wood strips needed to cover floor: 360 ÷ 0.1640625 = 2194


Or, in other words, I'm going to be gluing for a very, very long time.  Let's hope it turns out okay, and that I survive the ordeal with most of my sanity intact.  Or is it already gone?

2 comments:

  1. I'm voting for sanity already gone :D *sorry* I just did straight popsicle stick floors and I love them, but tiny zig zags sound like a lot of work and like you may have to concentrate. I did mine with an unused bookshelf shelf on my lap while watching television. Good Luck with yours, I am sure it will look fantastic!

    ReplyDelete
  2. Oh boy, that is going to be a lot of work. But if you make it all the way through, that is going to be the prettiest dollhouse floor I've ever seen. I love the scale of the coffee stirrers too as opposed to popsickle sticks. :)

    I had herringbone wood in my dining room last year, but I just printed it from a picture. Not so special. :)

    ReplyDelete

 

The Hard Way Copyright © 2012 Design by Ipietoon Blogger Template

Blogging tips